Home page > Technologies> DAC0800/DAC0802 8-Bit D/A Converters

DAC0800/DAC0802 8-Bit D/A Converters

Image of Texas Instruments logo

DAC0800/DAC0802 8-Bit D/A Converters

Texas Instruments offers the DAC0800 and DAC0802 8-bit D/A converters with a ±4.5 V to ±18 V power supply range

Image of Texas Instruments' DAC0800/DAC0802 8-Bit D/A ConvertersTexas Instruments' DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20 VP-P with simple resistor loads. The reference-to-full-scale current matching of better than ±1 LSB eliminates the need for full-scale trims in most applications, while the nonlinearities of better than ±0.1% over temperature minimizes system error accumulations.

The noise immune inputs will accept a variety of logic levels. The performance and characteristics of the device are essentially unchanged over the ±4.5 V to ±18 V power supply range and power consumption at only 33 mW with ±5 V supplies is independent of logic input levels.

The DAC0800, DAC0802, DAC0800C, and DAC0802C are a direct replacement for the DAC-08, DAC-08A, DAC-08C, and DAC-08H, respectively. For single supply operation, refer to AN-1525.

Features

  • Fast settling output current: 100 ns

  • Full scale error: ±1 LSB

  • Nonlinearity over temperature: ±0.1%

  • Full scale current drift: ±10 ppm/°C

  • High output compliance: -10 V to +18 V

  • Complementary current outputs


  • Interface directly with TTL, CMOS, PMOS, and others

  • Two quadrant-wide range multiplying capability

  • Wide power supply range: ±4.5 V to ±18 V

  • Low power consumption: 33 mW at ±5 V

  • Low cost


The information from the network, if infringement, please contact us